Turf Equipment - AgriMetal BWF 180 Engine Blower

Easily one of the most powerful debris clearing machines on the market!

An electrically driven chute controlled from the operator station discharges air at any point in a 360 degree arc. Turning the chute left or right increases production by allowing the operator to blow downfield and also on the return trip. The chute can direct air straight down to make quick work of clearing side walks, cart paths, and curb & gutters. Or even blow straight up to solve the problem of stubborn trees that hold their leaves late in the season.

Operation in the High position releases the wind stream at 16“ above ground level. Air velocity released at this height is very useful when clearing difficult areas such as sand traps, moguls and undulations on fine turf. Use this position also if ground clearance is a challenge in your application. Bottom of blower frame to turf measurement is 13” which eliminates dragging on curbs or roots.

Operation in the Low position drops the air outlet 5”. This increases efficiency on level turf by blasting air directly at material to be blown. The secret to moving large piles is to direct air under the pile and flip it over.

The AgriMetal BWT180 is powered by a quiet, dependable 23 HP Kawasaki gas engine featuring electric start. Rubber engine mounts eliminate frame cracking vibration common to competitor’s models.

Light weight and compact design allows this blower to be towed by very small tractors, mowers or utility vehicles for unprecedented access to confined areas.

Wide floatation tires protect valuable turf and a 4 1/2 gallon gas tank provides long duty cycles before refueling.

At 10,000 CFM of air flow the BWT180 is easily one of the most powerful debris clearing solutions offered to the turf trade and rounds out the most complete line of leaf and debris handling solutions in the industry.

Click on the following images to enlarge