Turf Equipment - Therrien Sweeper-Vac's

TV1 & TV2 Therrien Sweeper-Vac 200 & 220

Stainless Steel Lined Impeller Housing
84" Pick-up Module

VAC 200 - 7 Cubic Yards
VAC 220 - 10 Cubic Yards

Therrien Sweeper Vacs combine a manual rubber finger pick-up unit with a high volume & velocity vacuum system to efficiently remove leaves and debris from turf areas. Two hopper sizes are available to fit a variety of applications, and a manual pick-up hose and nozzle are standard. Tractors require 5 GPM double plug-in hydraulics and 30 PTO HP minimum.




Automatic Opening Rear Door



Optional Suction Hose

  Specifications
   
Hopper

Corrosion resistant galvanized steel.
Hydraulic (single ram) dump system with automatic door.
Operator sight window to monitor fill level.
Vac-200 - 7.1 cubic yards ( 72" X 48" X 96" )
Vac-220 - 10 cubic yards ( 72" X 54" X 120" )

Pick-up module

Hydraulic with quick couplers for easy disconnecting.
84" pick-up width, 4 rows with 133 rubber fingers.
Infinitely adjustable height system with 2-6" castor wheels (no shims)
Removable panels (4) for access and cleaning.
Standard anti-scalp turf protector rollers .

Controls

Operator controls located on adjustable arm (connected to tractor).
Pick-up unit. On/Off control
Pick-up unit. Lift/Lower
Dump box. Raise/Lower

Impeller

PTO driven (540 RPM)
35" diameter, 4 blade, 3/8" steel construction.

Impeller housing

Stainless steel with clean out door

Suction hose

Optional - 12' 6" X 8" with steel nozzle and double grip handles.
Storage pins keep hose out of the way and protected when not in use.
Isolation door may be used to direct maximum airflow to suction hose.

General specs

Lubrication points - Easily accessible and marked for maintenance.
Jack stand standard with remote storage mount.
Tie down loops - standard
PTO storage bracket included when not in use.
Wheels and tires (2) 26X12.00-12 turf tires

Weight : 3560 pnds (model 200)
  4300 pnds (model 220)
Dimensions : L-192" X H-85" X W-88" (model 200)
  L-216" X H-85" X W-88" (model 220)

Noise 91 DBA

   



TV3 Therrien Sweeper-Vac 320

Therrien Sweeper Vac combine a manual rubber finger pick-up unit with a high volume & velocity vacuum system to efficiently remove leaves and debris from turf areas. Two pick-up units sizes are available to fit a variety of applications. Tractors require 5 GPM double plug-in hydraulics and 30 PTO HP minimum is recommended.




All SweeperVacs, including the Model 320, have an adjustable tongue to make hook-up to any tractor quick and easy.
 
  Specifications
   
Hopper

Corrosion resistant galvanized steel.
Hydraulic (single ram) dump system with automatic door.
Operator sight window to monitor fill level.
Vac-320 - 14.5 cubic yards ( 86" X 54" X 132")

Pick-up module

Hydraulic with quick couplers for easy disconnecting.
120'' or 144" pick-up width, 4 rows with 184 or 228 rubber fingers total.
Infinitely adjustable height system with 3-6" castor wheels. (no shims) Removable panels (4) for easy access and cleaning.
Standard anti-scalp turf protector rollers.

Controls

Operator controls located on adjustable arm (connected to tractor.)
Pick-up module. On/Off control
Pick-up module. Lift/Lower
Dump box/automatic door control.

Impeller

PTO driven (540 RPM)
35" diameter, 4 blade, 3/8" steel construction.

Impeller housing

Stainless steel with clean out door

Suction hose
(optional)

Size: 12' 6" X 8" with aluminium nozzle and double grip handles.
Storage pins keep hose out of the way and protected when not in use.
Isolation door may be used to direct maximum airflow to suction hose.

General specs

Lubrication points - Remote fittings with clear markings.
Jackstand standard with remote storage mount.
Tie down loops - standard
PTO storage bracket included.
Wheels and Tires (4) 26X12.00-12 turf tires
Weight: 5000 pnds (model 320)
Dimensions L-216" X H-85" X W-124"
Noise 91 DBA

   

HOME | ABOUT US | AG PRODUCTS | TURF PRODUCTS | WATERERS | DEALERS | CONTACT US